SAK-TC297TA-128F300N BC
Summary of Features:
The TC29x product family has the following features:
• High Performance Microcontroller with three CPU cores
• Two 32-bit super-scalar TriCore CPUs (TC1.6P), each having the
following features:
– Superior real-time performance
– Strong bit handling
– Fully integrated DSP capabilities
– Multiply-accumulate unit able to sustain 2 MAC operations per
cycle
– up to 300 MHz operation at full temperature range
– up to 300 MHz operation at full temperature range
– up to 32 Kbyte Instruction Scratch-Pad RAM (PSPR)
– 16 / 32 Kbyte Instruction Cache (ICACHE)
– 8 Kbyte Data Cache (DCACHE)
• Lockstepped shadow cores for TC1.6P core 1
• Multiple on-chip memories
– All embedded NVM and SRAM are ECC protected
– up to 8 Mbyte Program Flash Memory (PFLASH)
– up to 768 Kbyte Data Flash Memory (DFLASH) usable for EEPROM
emulation
– 32 Kbyte Memory (LMU)
– BootROM (BROM)
• 128-Channel DMA Controller with safe data transfer
• Sophisticated interrupt system (ECC protected)
• High performance on-chip bus structure
– 64-bit Cross Bar Interconnect (SRI) giving fast parallel access
between bus masters, CPUs and memories
– 32-bit System Peripheral Bus (SPB) for on-chip peripheral and
functional units
– One bus bridge (SFI Bridge)
• Safety Management Unit (SMU) handling safety monitor alarms
• Memory Test Unit with ECC, Memory Initialization and MBIST
functions (MTU)
• Hardware I/O Monitor (IOM) for checking of digital I/O
• Versatile On-chip Peripheral Units
– Four Asynchronous/Synchronous Serial Channels (ASCLIN) with
hardware LIN support (V1.3, V2.0, V2.1 and J2602) up to 50 MBaud
– Six Queued SPI Interface Channels (QSPI) with master and slave
capability up to 50 Mbit/s
– High Speed Serial Link (HSSL) for serial inter-processor
communication up to 320 Mbit/s
– Two serial Micro Second Bus interfaces (MSC) for serial port
expansion to external power devices
– Two MultiCAN+ Module with 6 CAN nodes and 384 free assignable
message objects for high efficiency data handling via FIFO
buffering and gateway data transfer
– 15 Single Edge Nibble Transmission (SENT) channels for connection
to sensors
– Up to two FlexRayTM modules with 2 channels (E-Ray) supporting
V2.1
– One Generic Timer Module (GTM) providing a powerful set of
digital signal filtering and timer functionality to realize
autonomous and complex Input/Output management
– One Capture / Compare 6 module (Two kernels CCU60 and CCU61)
– One General Purpose 12 Timer Unit (GPT120)
– One General Purpose 12 Timer Unit (GPT120)
– Peripheral Sensor Interface with Serial PHY (PSI5-S)
– Inter-Integrated Circuit Bus Interface (I2C) conforming to V2.1
– Optional IEEE802.3 Ethernet MAC with RMII and MII interfaces
(ETH)
• Versatile Successive Approximation ADC (VADC)
– Cluster of 11 independent ADC kernels
– Input voltage range from 0v to 5.5V (ADC supply)
• Delta-Sigma ADC (DSADC)
– Ten channels
• Digital programmable I/O ports
• On-chip debug support for OCDS Level 1 (CPUs, DMA, On Chip Buses)
• Dedicated Emulation Device chip available
– multi-core debugging, real time tracing, and calibration
– Aurora Gigabit Trace Port (AGBT) on some variants
– four/five wire JTAG (IEEE 1149.1) or DAP (Device Access Port)
interface
• Power Management System and on-chip regulators
• Clock Generation Unit with System PLL and Flexray PLL
• Embedded Voltage Regulator
Technological Parameters:
| category | Integrated Circuit (IC) |
| manufacturer | Infineon Technologies |
| series | AURIX™ |
| Kernel specifications | 32-bit three core |
| speed | 300MHz |
| peripheral | DMA,WDT |
| Program storage capacity | 8MB(8M x 8) |
| Program Memory Type | flash memory |
| Installation type | Surface mount type |
| Supplier Device Packaging | PG-LFBGA-292-6 |
Customer Service:
1. Do you support BOM lists?
Of course, we have a professional team to provide BOM.
2. Shown below. Behind MOQ?
Our MOQ is flexible and can be provided according to your needs,
with a minimum of 10 pieces.
3. What about lead time?
After receiving the deposit, we will arrange to pack the goods and
contact logistics for delivery. The duration is 3-7 days.
4. Our advantage?
1. Stable and sufficient supply
2. Competitive pricing
3. Rich BOM experience
4. Perfect after-sales service
5. Professional test certificate
5. Our service?
Payment methods :T/T, L/C, D/P, D/A, MoneyGram, Credit Card,
paypal, Western Union, Cash, Escrow, Alipay...
6. Transportation:
DHL, TNT, FedEx, EMS, DEPX, Air, Sea Shipping
Product Photos:
